-
ABS solvent cement
Clear, fast drying, one-component ABS solvent cement, with high viscosity and high bonding strength. It is specially formulated for bonding ABS, Styrene and Polycarbonate.
-
LD-1232 Low Shrinkage and low Odor mma structural adhesive for metal
Third generation, all-purpose, two-part 10:1, low shrinkage & low odor MMA structural adhesive for structurally bonding metal without primer needed.
-
EST-490DP Two-part 2:1 epoxy structural adhesive
Two-part 2:1, black, thixotropic, gap filling two component epoxy structural adhesive with excellent heat and environmental resistance. it is designed for use where toughness and high strength are required and shows special benefits in the construction of composite assemblies.
-
Sintered Stone Adhesive
Sintered stone adhesive for perfect mitre joint on sintered stone fabrication.
-
mixing tip for different cartridge
mixing tip /Nozzle for difference cartridge size
-
PO-56120 MMA Structural adhesive
third generation, advanced, slow cure, two-part 10:1 Methacrylate metal-bonding adhesive, meeting all three highest metal bonding standards for automotive industry.
-
EST-FL40 1:1 Grey epoxy structural adhesive
Two part 1:1, toughened, medium viscosity, industrial grade epoxy adhesive with a medium working life. Once mixed, this epoxy cures at room temperature to form a flexible, gray bonding line with excellent resistance to shock and impact. When fully cured, this epoxy is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.
-
Primber PR-70
industrial grade, low VOC emission, non-bodied, fast acting primer for PVC and CPVC pipe and fittings with aggressive action to soften and dissolve the joining surfaces.
-
SO-0830 MMA structural adhesive
Two-part 10:1 non-sagging methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies, and with very good bond strength of SMC.
-
Acrylic #240 clear acrylic adhesive
Clear, two-component (10:1), reactive, high-strength adhesive, forming high strength joints in a few hours. The cemented joint retain high clarity, high strength and resistance to the effects of weathering and aging.
-
Acrylic-30 one component solvent acrylic adhesive
One component, water-thin, very fast curing solvent acrylic adhesive for quickly development of high strength, clear bond to many thermoplastic, especially Acrylic and polycarbonate sheet.
-
Cleaner CL-50
clear, low VOC emission, water-thin, solvent cleaner, specifically formulated to remove grease, oil and dirt from the bonding surfaces of PVC, CPVC, ABS pipe and fittings.
-
Di-9286 UV adhesive, UV curing and heating curing, dual curing, modified epoxy resin
UV and heating dual curing modified epoxy resin. Halogen-free. As a factory, we offer smart dual curing solutions for different application on different substrates.
-
Substrate Bonder glue (E-008)
Fast curing Substrate Bonder glue (E-008) for attaching different substrates in countertop application.
-