-
PO-0419 MMA Structural Adhesive
Third generation, advanced, fast cure, two-part 10:1 Methacrylate metal-bonding adhesive, meeting all three highest metal bonding standards for automotive industry.
-
Plastic pipe cement PVC-227
industrial grade, clear, low VOC emission, medium bodied, very fast setting, high strength PVC solvent cement.
-
GP-50180 MMA structural adhesive
Two-part 1:1, non-sagging, methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite, with unique combination of excellent fatigue endurance, outstanding impact resistance and superior toughness, and uv stable.
-
EST-FL40 1:1 Grey epoxy structural adhesive
Two part 1:1, toughened, medium viscosity, industrial grade epoxy adhesive with a medium working life. Once mixed, this epoxy cures at room temperature to form a flexible, gray bonding line with excellent resistance to shock and impact. When fully cured, this epoxy is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.
-
HF-0619 MMA Structural Adhesive
Third generation, advanced, halogen-free, two-part 10:1, methacrylate adhesive, specifically designed for structural bonding of various electronic assemblies.
-
UV-G UV adhesive for lamination and gap filling
Get high-quality UV-G UV curing lamination adhesive from our factory. Our adhesives provide strong bond and fast curing for all your lamination needs on glass, stone, acrylic, polycarbonate and so on.
-
POP-0418 MMA structural adhesive
third generation, all-purpose, fast cure two-part 10:1 methacrylate adhesive for structurally bonding metals, engineering plastics and composite assemblies with little to no surface preparation. It provides a unique combination of high strength, excellent fatigue endurance, outstanding impact resistance, and superior toughness.
-
Cleaner CL-50
clear, low VOC emission, water-thin, solvent cleaner, specifically formulated to remove grease, oil and dirt from the bonding surfaces of PVC, CPVC, ABS pipe and fittings.
-
PO-2775 MMA structural adhesive
third generation, advanced, Middle speed cure, two-part 10:1 Methacrylate metal-bonding adhesive, meeting all three highest metal bonding standards for automotive industry.
-
LD-1232 Low Shrinkage and low Odor mma structural adhesive for metal
Third generation, all-purpose, two-part 10:1, low shrinkage & low odor MMA structural adhesive for structurally bonding metal without primer needed.
-
UV-M UV adhesive for marble lamination
high-quality UV adhesive for lamination of marble, glass, solid surface, acrylic, sintered stone...
-
Substrate Bonder glue (E-008)
Fast curing Substrate Bonder glue (E-008) for attaching different substrates in countertop application.
-
Acrylic #240 clear acrylic adhesive
Clear, two-component (10:1), reactive, high-strength adhesive, forming high strength joints in a few hours. The cemented joint retain high clarity, high strength and resistance to the effects of weathering and aging.
-
EST-806 1:1 Clear epoxy structural adhesive
Two component 1:1, clear, fast setting epoxy structural adhesive, used in many applications where optical clarity and/or fast cure rate needed, and it bonds a variety of materials including metals and plastics.
-
ABS solvent cement
Clear, fast drying, one-component ABS solvent cement, with high viscosity and high bonding strength. It is specially formulated for bonding ABS, Styrene and Polycarbonate.